If you have a fire or water emergency, please call us now at (210) 858-9696

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Remember These Steps When Treating a Wet Wooden Floor

9/4/2020 (Permalink)

Wet wooden floor Water damaged wooden floor in Stone Oak, TX

Clean Your Wooden Floors With The Right Steps

A wooden floor gives your Stone Oak, TX, business a natural, rustic look. However, a pipe burst or spilled water can damage your flooring if it is not treated fast. Once you have dealt with the water source, you should address the damaged floor immediately. Large incidents should be handled by commercial building restoration services, but you can clean up smaller cases with the right steps.

Dry Up the Affected Area
The first step is always to remove all humidity from the wood floor. There are a variety of tools and materials you can use depending on how much water there is, including:

  • Mops
  • Wet vacuums
  • Kitty litter
  • Newspaper or paper towels
  • Neutral powder

Once you remove most of the water, dry the location as much as you can. Encourage air circulation by deploying fans, dehumidifiers and even air conditioning. Avoid using the heater, as the strong temperature can damage the vulnerable wood instead of dry it.

Prevent Mold Growth
The direct damage caused by the pipe burst is known as the primary damage. While it is important to reduce it, you also need to prevent secondary damage such as mold growth. The combination of high humidity and the wood's organic material create the ideal environment for mold to grow and thrive. While drying the area plays a large role in stopping the development, you should also apply the appropriate disinfectants to discourage spores. If you see mold, contact mold remediation specialists.

Treat Damaged Wood
If there is too much water and you are unable to sufficiently dry the floor, it may take a while to recover. Some of the wood in the wet floor can cup and warp out of alignment. If this is a minor case, you can use drying devices both above and below the area to dry it. If the damage is more severe, consult repair technicians.
Spills, leaks or a pipe burst can damage your business's high-quality wood floor. If the affected area is small enough, use these techniques to avoid replacing the wood.

Other News

View Recent Posts