3 Safety Tips for Wet Light Fixtures
A leaky pipe or roof can introduce water to light fixtures. The presence of moisture in close proximity to electrical lighting raises the risk of electric shock at a residence in Timberwood Park, TX. It is important that homeowners and occupants are aware of water in light risks and take safety precautions leading up to water damage restoration.
1. Turn Off the Power
Electrical lighting and water do not mix. It is critical to shut off the flow of electricity to reduce electrocution risks. Never attempt to use a light switch. Even after the power is off, it is advisable to use a non-contact voltage tester on a dry electrical source to ensure no electricity is flowing through lines prior to any attempt to deal with ceiling damage.
2. Shut Off the Water If Necessary
If the water in light originates from a broken or leaking supply line, it will also be beneficial to shut off the water supply. While this measure will not eliminate water that has already collected above the ceiling or in a fixture, it can prevent more water from taking the same course.
3. Contact Restoration Experts
A ceiling that has become swollen with water and flooded light fixtures poses serious safety and restoration challenges. Homeowners should schedule an inspection with certified water damage restoration professionals. These experts can take measures to minimize the risk of structural damage or ceiling collapse and try to limit water damage to a home interior.
The potential for electrical shock to occur at any point in a circuit is one of the primary water in light dangers. A risk is posed when interacting with a light switch in a household in Timberwood Park, TX, let alone attempting to directly address the ceiling leak or flooded fixture. Homeowners should shut off the power or contact the electrical company before contacting trained restoration professionals.